中山市网络世界杯直播有限公司网站

1、环保阻燃 ABS5VA、PC/ABS合金：具有优异的阻燃性、良好的刚性和韧性、易加工、灼热丝温度高达700°c以上等特点。
2、阻燃PP 主要添加磷-氮膨胀型阻燃剂或者磷-氮-溴等滴落型阻燃剂制备而成，具有阻燃效率高、无析出、发烟低、模具腐蚀小、产品密度低等优点，可根据需求达到UL94 V0、V2等级。

1, Characteristics of environmental Flame retardant ABS5VA, PC/ABS alloys: Excellent flame-retardant performance, good rigidity and toughness, easy processing.The glow wire temperature of products reach to 700℃

2, Flame retardant PP is prepared by adding phosphorus-nitrogen expansion flame retardant or phosphorus-nitrogen-bromine drip flame retardant, which has the advantages of high flame retardant efficiency, no precipitation, low smoke, low mold corrosion, and low product density. According to the demand, the the flame retardant level can reach UL94 V0 OR V2.

性能 performance	测试标准 standard test	单位 unit	FR-ABS5VA	FR-PC/ABS	无卤阻燃FR-PP Halogen free flame retardant fr-pp	FR-PP2
比重 proportion	ASTM D1238	g/cm3	1.2	1.23	1.06	0.93
拉伸强度 Tensile Strength	ASTM D638	MPa	40	55	25	24
断裂伸长率 Elongation at break	ASTM D638	%	16	20	40	110
弯曲强度 Bending strength	ASTM D790	MPa	68	87	33	29
弯曲模量 Flexural modulus	ASTM D790	MPa	2200	2200	1600	1200
悬臂梁缺口冲击强度 Izod notched impact strength	ASTM D256	KJ/m2	16	60	4	12
阻燃性能 Flame retardant performance	UL-94	1.6mm/3.2mm	5VA	V0	V0	V2
灼热丝 Glow wire	IEC60695-2-13	GWIT ℃	725	850	775	/
应用 application	-	-	电控盒 Electric control box	线圈骨架、电机壳体等 Coil bobbin,motor housing,etc	电池支架、电子电器外壳 Battery holder,electronic application housing	电子电器外壳 Electronic housing

改性聚丙烯材料通过对树脂，填料和助剂的筛选，以及采用先进的生产设备和优化的工艺条件制备而成，材料具有尺寸稳定性好、模具的普适性强、良品率高、性价比高的优势。产品种类包括填充、增强、抗静电、抗菌、耐候等，主要应用于家电、日用品等领域。

The main components of modified polypropylene are resins, fillers and Auxiliaries, which are prepared using advanced production equipment and optimized process conditions. The materials have the advantages of good dimensional stability, strong adaptability of molds, High pass rate, and good economy.Product types include filling, enhancement, antistatic, antibacterial, weather resistance, etc., mainly used in home appliances, daily necessities and other fields.

项目 project	测试方法 Test Methods	单位 unit	典型值 Typical value
项目 project	测试方法 Test Methods	单位 unit	高光泽PP High gloss pp	超高光泽PP Ultra high gloss pp	耐热PP Heat resistant pp	PP-G10
比重 proportion	ASTM D1238	g/cm3	1.15	1.1	1.23	1.1
拉伸强度 Tensile Strength	ASTM D638	MPa	25	32	30	65
断裂伸长率 Elongation at break	ASTM D638	%	30	54	15	10
弯曲强度 Bending strength	ASTM D790	MPa	28	40	43	80
弯曲模量 Flexural modulus	ASTM D790	MPa	1600	2000	3600	4500
悬臂梁缺口冲击强度 Izod notched impact strength	ASTM D256	KJ/m2	3.5	6	2	5
热变形温度 Heat distortion temperature	ASTM D256	℃	105	110	125	110
阻燃性能 Flame retardant performance	UL-94	-	HB	HB	HB	HB
表面光泽 Surface gloss	ISO2813	-	70	86	22	-
成型收缩率 Mold shrinkage	ISO294-4	%	1.3~1.5	1.3~1.5	0.9~1.5	0.8~0.8
特性 characteristic	-	-	高光泽、高流动、耐热 High gloss,high flow,heat resistant	超高光泽、高流动、耐热 Ultra High gloss,high flow,heat resistant	高耐热、高刚性、尺寸稳定 High heat resistance,high rigidity and dimensional stability	高刚性、高耐热、10%玻纤增强 High rigidity,high heat resistance,10% gloss fiber reinforcement
应用 application	-	-	饭煲外壳、小家电外壳 Rice cooker shell,small appliance shell	饭煲外壳、小家电外壳 Rice cooker shell,small appliance shell	饭煲内衬、中环、家用电器内部件 Rice cooker lining,middle ring,internal parts of household appliances	电子电器、日用品结构件 Electronic appliances,daily necessities,structural parts

材料具有流动性好、易成型加工，耐热性优异等特点；制品表面无浮纤、硬度高、光泽度高，可实现免喷涂效果。

The material has the characteristics of good fluidity, easy molding, excellent heat resistance, etc. The surface of the product has no floating fiber, with high hardness and high gloss, and the effect of free spraying.

性能 performance	测试标准 standard test	单位 unit	PC+20%玻纤 Pc+20% glass fibe	PC+30%玻纤 Pc+20% glass fibe
比重 proportion	ASTM D1238	g/cm3	1.38	1.43
拉伸强度 Tensile Strength	ASTM D638	MPa	68	72
断裂伸长率 Elongation at break	ASTM D638	%	6	5
弯曲强度 Bending strength	ASTM D790	MPa	120	132
弯曲模量 Flexural modulus	ASTM D790	MPa	5000	5500
悬臂梁缺口冲击强度 Izod notched impact strength	ASTM D256	KJ/m2	7	6
成型收缩率 Mold shrinkage	ASTM D955-08	%	0.2	0.18
热变形温度 Heat distortion temperature	ASTM D648	℃	124	126
应用 application	-	-	空调导风板,家电结构性部件 Air conditioniong air deflector,home appliance structural parts

防异响材料具有很低的线性膨胀系数，可避免制件在使用时，因冷热交替导致的收缩膨胀而出现的异响；材料具有较低的动摩擦系数，可保障制件稳定顺畅的运转，减少出现异常噪音。该类材料非常适合在空调出风口格栅、导风板等制件中使用。

The anti-abnormal acoustic material has a very low linear expansion coefficient, which can avoid the noise caused by the contraction and expansion caused by alternating cold and heat during the use of the parts; The material has a low friction coefficient, which can ensure the stable and smooth operation of the parts and reduce the occurrence of abnormal noise. This kind of material is very suitable for use in air conditioning outlet grille, air guide board and other parts.

项目 project	测试方法 Test Methods	单位 unit	典型值 Typical value
项目 project	测试方法 Test Methods	单位 unit	ABS	HIPS
比重 proportion	ASTM D1238	g/cm3	1.08	1.07
拉伸强度 Tensile Strength	ASTM D638	MPa	37	30
断裂伸长率 Elongation at break	ASTM D638	%	20	15
弯曲强度 Bending strength	ASTM D790	MPa	63	47
弯曲模量 Flexural modulus	ASTM D790	MPa	2200	2200
悬臂梁缺口冲击强度 Izod notched impact strength	ASTM D256	KJ/m2	19	12
热变形温度 Heat distortion temperature	ASTM D648	℃	86	88
线膨胀系数 Linear expansion coefficient	GB/T36800.2-2018	m/k	6.5*10(-5)	1.88*10(-6)
特性 characteristic	-	-	高尺寸稳定性 High dimensional stability	高尺寸稳定性 High dimensional stability
应用 application	-	-	出风口格栅、导风板 Air outlet grille, air deflector	出风口格栅、导风板 Air outlet grille, air deflector

1、选用低发散材料、低气味助剂有效去除VOC，防止二次污染。
2、生产过程采用双抽真空技术，物料混合充分，流动性好，有效降低小分子物质残留。
3、采用特殊助剂、有效阻止材料降解，物理性能优异。
4、依据HJ/T400-2007(车内挥发性有机物和醛酮类物质采样测定方法)进行检测，达到BG/T27630-2011（乘用车内空气质量评价指南）中 VOC浓度限值要求。

1, Low VOC divergent materials prepared by using low-odor resin and additives，which Reducing low molecular material sources
2, the production process adopts dual vacuum technology, which can effectively remove small molecules substances
3, the product added high performance stability additives to prevent material degradation, the product has excellent physical properties.
4, Testing in accordance with HJ/T 400-2007 requirements to meet VOC concentration limits in BG/T27630-2011(air quality evaluation guidelines for passenger vehicles).

性能 performance	测试标准 standard test	单位 unit	ABS SDA601	PC/ABS SDJ502
比重 proportion	ASTM D792	g/cm3	1.15	1.18
拉伸强度 Tensile Strength	ASTM D638	MPa	41	50
断裂伸长率 Elongation at break	ASTM D638	%	15	56
弯曲强度 Bending strength	ASTM D792	MPa	68	85
弯曲模量 Flexural modulus	ASTM D792	MPa	2200	2650
悬臂梁缺口冲击强度 Izod notched impact strength	ASTM D256	KJ/m2	18	38
TVOC	PV3341	ugc/g	25	20
应用 application	-	-	家电面板、出风口面板、汽车内饰件 Home appliance panel,air outlet panel,automotive interior parts